Description
►Brief introduction
FL1-20 mobile mud brick making machine is using diesel engine as power source,so it could make a good use in palces lack or limited of electricity.
♦ 1. With car tyres and tralier,easy to move to anywhere convenient to you.
♦ 2. Using hydraulic technology,so the blocks produced are of good quality, large density,high strength and smooth surface.
♦ 3. Manual material feeding,two oil cylinder will give a powerful press(16MPa) on the block, finally the lower press head will lift up and the block will come out.
♦ 4. Easily operated by unskilled labour force.
♦ 5. One machine can produce different kinds of interlocking block by changing moulds.When building ,just lock them together.
♦ 6. The mould use precise wire cutting to reduce error and carburizing heat treatment to prolong its service life
►Host machine main technology parameter♦ 1. With car tyres and tralier,easy to move to anywhere convenient to you.
♦ 2. Using hydraulic technology,so the blocks produced are of good quality, large density,high strength and smooth surface.
♦ 3. Manual material feeding,two oil cylinder will give a powerful press(16MPa) on the block, finally the lower press head will lift up and the block will come out.
♦ 4. Easily operated by unskilled labour force.
♦ 5. One machine can produce different kinds of interlocking block by changing moulds.When building ,just lock them together.
♦ 6. The mould use precise wire cutting to reduce error and carburizing heat treatment to prolong its service life
| Dimension |
1500x1250x1500mm |
Weight |
800Kg |
| Shaping cycle | 15~20s | Pressure |
18Mpa |
| Host machine power | 5.5KW/16HP | Mixer model | JQ350 |
| Capacity |
1440~1920Pcs/8 hours | Maximum block size | 240x220x115mm |
| Pieces/Mould | 1 | Voltage | Adopts to local voltage |
►Production requirement
| Area | 800m2 | Worker |
3~4 person |
| Workshop | 50m2 | Distribution power | 5.5KW |
| Raw material store workshop | 300m2 | Fuel consumption | 2~3L/hour |
| Office | 30m2 | Curing area | 400m2 |
►Brick Moulds
FL1-20 is capable of making all kinds of brick below,and we offer one set free mould.
